ReadyMadeRC
1.2 METER (3.9FT) RCA/3.5MM VIDEO CABLE-FATSHARK AND IMMERSIONRC
,
This is a 1.2 meter video cable compatible with FatShark ...ReadyMadeRC
FLOATY BACKDOOR
Included Items:, , Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,
Easy to spot flotation backdoor lets your HD HERO camera ...ReadyMadeRC
CURVED + FLAT ADHESIVE MOUNTS
Includes:, 3 Curved Adhesive Mounts,
Attach your GoPro camera to flat and curved surfaces with ...ReadyMadeRC
DJI WOOKONG MULTI (WK-M) MULTIROTOR CNTRL
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Introduction:, , Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
DJI Wookong Multi-Rotor stabilization controller is a complete flight system ...ReadyMadeRC
SUCTION CUP MOUNT
| Note | For maximum holding strength, attach to a clean surface |
Includes:,
Attach your GoPro camera with this industrial strength suction cup ...ReadyMadeRC
SUCTION CUP MOUNT
| * Warranty | 1 Year |
| Model Number | GSC30 |
| Construction | nylon and polycarbonate |
| Hardware | stainless steel |
What’s Included:, * 1 Suction Cup Camera Mount, Restrictions:,
CAN NOT BE BACK ORDERED Industrial strength suction cup for ...ReadyMadeRC
PRO700 700TVL WDR CCD (NTSC)
| PAL | (H)1024x(V)596; NTSC |
| S/N Ratio | More Than 50dB (AGC off) |
| DNR | 2D DNR (Digital Noise Reducer) |
| Electronic Shutter | PAL |
| Video Output | 1Vp-p 75 Oms , Negative |
| Audio Output | 300mV at 600 Oms |
| Operating Temperature | -10℃ ~ + 50℃, RH 95% Max |
| Storage Temperature | -20℃ ~ + 60℃, RH 95% Max |
Pixels:, Power Consumption:, DC 5V-15V, 150mA-50mA,
Offering the best picture available for FPV, PERIOD! I challenge ...ReadyMadeRC
PRO700 700TVL WDR CCD (PAL)
| PAL | (H)1024x(V)596; NTSC |
| S/N Ratio | More Than 50dB (AGC off) |
| DNR | 2D DNR (Digital Noise Reducer) |
| Electronic Shutter | PAL |
| Video Output | 1Vp-p 75 Oms , Negative |
| Audio Output | 300mV at 600 Oms |
| Operating Temperature | -10℃ ~ + 50℃, RH 95% Max |
| Storage Temperature | -20℃ ~ + 60℃, RH 95% Max |
Pixels:, Power Consumption:, DC 5V-15V, 150mA-50mA,
Offering the best picture available for FPV, PERIOD! I challenge ...ReadyMadeRC
DJI NAZA-M LITE MAIN CONTROLLER ONLY
| Please note | Naza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED. |
Includes:, 1. Naza-Lite Gyro, All-in-One Design:, For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control., Downloads:, CLICK HERE,
LIMIT 1 PER ORDER PER DAY That's right! Flight Controller ...ReadyMadeRC
DJI NAZA-M LITE GPS ANTENNA ONLY
| Please note | Naza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED. |
All-in-One Design:,
REPLACEMENT GPS ANTENNA ONLY Introducing the all new DJI Naza-M ...ReadyMadeRC
DJI NAZA-M LITE & GPS COMBO SET
| Please note | Naza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED. |
All-in-One Design:, , Includes:, 1. Naza-Lite Gyro, Downloads:,
That's right! Flight Controller with GPS for under $220.00! Introducing ...ReadyMadeRC
CASTLE CREATIONS PHOENIX EDGE 75 BRUSHLESS ESC, 34V MAX. W/BEC
| MIN | 2S LiPo MAX |
Helis:, 500 class, Fixed wing:, .40 - .52, Input voltage:, Max continuous amperage at full throttle:, 75 amps*, BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, 5 amp peak**, Width:, 2.0" (50.8mm), Length:, 2.8" (71.9mm), Height:, 0.9" (23.2mm), Weight w/wires:, 4.0 oz (113.4g), Weight w/o wires:, 2.5 oz (70.9g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, Battery and motor connectors sold separately, Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires., *RC HOBBY APPLICATION RATING: 75 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.,
With the debut of the Phoenix Edge series of ESCs ...ReadyMadeRC
GOPROFESSIONAL CASES - PHANTOM/GOPRO HARD CASE
| Exterior Dimensions | 20.25" x 16.93" x 8.78" |
| Weight | 13.15 lbs |
Features:, All our products are the highest water-jet precision cut. We never cut corners and die-cut or punch cut our custom cases., The XB-DJI Will Fit 9" Props:, 1 DJI Phantom, GoPro Equipment:, 1 Additional GoPro Hero, Specifications:,
Go Professional Cases Introduces the XB-DJIFS The Elite Original Customized ...ReadyMadeRC
DJI A2 FLIGHT CONTROLLER SYSTEM AND DJI OSD MKII COMBO
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System and qty 1 DJI iOSD MkII. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest ,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...